Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cleaning & Sweep Across Mansfield
A Chimney Cleaning & Sweep in Mansfield typically runs $180-$320 for a standard annual service, with Level 2 camera inspections ranging $250-$450 depending on system type. Most jobs are completed in a single visit, and our crews coordinate dispatch from our Boston office with dedicated routing to Mansfield and the surrounding towns. Call (508) 545-9737 to speak with a live person - any hour, any day.
We’ve been answering calls this way for over 42 years. Mansfield homeowners know the difference. You live in a town where the housing stock tells two completely different stories: the 1970s-1990s colonials and ranches off Route 495 with their factory-built zero-clearance fireplaces, and the older pre-WWII capes near the town center with traditional masonry chimneys and clay tile liners. One town. Two inspection protocols. We know which is which before we pull the truck into your driveway on Chauncy Street or up near the commuter-rail station.
Why Hearthstone Chimney Co. Is Mansfield’s Preferred Chimney Cleaning & Sweep Company
Mansfield sits at a rough climatic crossroads. Cold Arctic air drops down while wet nor’easters push Narragansett Bay moisture up from the south. That freeze-thaw cycling chews through galvanized chase covers and spalls chimney crowns faster than inland towns see. We’ve handled enough Chimney Cap & Crown in Mansfield jobs near I-495 to know the pattern. Our technicians arrive with the right materials - stainless steel where galvanized has already failed once.
The 90-Day Done Right Promise governs every job. In writing. No arguing. If it’s not right, we come back. That’s been our standard since 1984.
A live person answers every call, 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback queue. When you call (508) 545-9737, someone picks up.
Our background-checked, uniformed technicians carry professional-grade materials from Gelco, Olympia Chimney, and Famco - brands we’ve specified for decades because they hold up to Mansfield’s particular combination of coastal moisture and hard winter use. Most jobs finish in one visit. The price we quote is the price on the invoice.
Our Chimney Cleaning & Sweep Services in Mansfield
Level 1 Inspection
A Level 1 inspection covers readily accessible portions of the chimney structure and flue. For Mansfield’s older masonry homes near the town center - the pre-WWII capes and colonials with clay tile liners - this means checking mortar joints, crown condition, and flue integrity from the firebox up. But here’s the catch: if your home was built during Mansfield’s 1970s-1990s boom off Route 495, a Level 1 inspection alone won’t catch warped firebox panels or cracked metal flue liner joints. The brick you see is often a veneer. The real system is metal, and it ages differently.

Level 2 Inspection
This is where we document what you actually have. Our Level 2 camera inspection runs a high-resolution video up the flue, and we photograph every finding. You see the images. We give you a plain-English verdict. No jargon, no scare tactics.
In Mansfield, this matters more than most towns. A homeowner near the commuter-rail station called us because their “brick” fireplace had a persistent smoky smell even with the damper closed. Our tech pulled the wood stove insert that had been retrofitted during the energy crisis and found the gap between the insert collar and the original prefab metal flue packed with glazed third-degree creosote. We scraped and chemically treated the joint, replaced the corroded galvanized chase cover with a stainless unit from Olympia Chimney, and the draft restored immediately. Without a Level 2 inspection and pulling that insert, the creosote buildup would have stayed hidden. That’s the kind of finding a masonry-only inspection misses.

Creosote Removal
Creosote accumulates in layers. First degree is flaky soot. Second degree is crunchy chips. Third degree is glazed, tarry, and it burns. Mansfield’s factory-built fireplaces with retrofitted wood stove inserts create a specific hazard: the constricted flue draft concentrates creosote at the insert-to-liner collar seam, where temperatures drop and gases condense. We’ve found seams packed solid with glazed creosote that the homeowner never suspected because the insert hid it from view.
Our creosote removal service includes mechanical scraping, rotary cleaning with specialized brushes sized to your flue diameter, and chemical treatment for glazed deposits. For Mansfield’s prefab systems, we verify the metal flue liner joints are intact before we finish. A cracked joint with creosote buildup is a fire hazard. We document it with photos. You decide the timeline.

Soot Removal and Annual Sweep
An annual sweep removes soot before it hardens into creosote, and it gives us eyes on your system before burning season. With roughly 5,500 heating degree days annually, Mansfield homeowners who burn wood even intermittently need this as real maintenance, not an upsell.
Our annual sweep includes full debris removal from the firebox, smoke chamber, and flue; inspection of the damper and firebox panels; and a written condition report. For prefab systems, we check chase cover integrity and look for water tracking at the seams. For masonry systems near the town center, we crown and cap condition. The $89 Seasonal Tune-Up covers the sweep and basic inspection for systems in normal condition. If we find something that needs attention, we show you the photo and explain the repair. Nothing is recommended without evidence you can see.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mansfield
We stock parts and specify materials from Gelco, Olympia Chimney, and Famco - brands that have earned their place in our trucks through decades of field performance. For Mansfield’s coastal-adjacent climate, we specify stainless steel chase covers and caps where galvanized has already corroded out, because we’ve watched too many homeowners replace the same galvanized component every three to four years. Gelco’s stainless caps and Olympia Chimney’s chase cover systems hold up to the salt-laden moisture that rides in on those south-pushing nor’easters. We keep common sizes in stock, so most replacements don’t require a second trip. That’s the difference between a parts-runner operation and a company that’s been serving this region for over 42 years.
Common Chimney Cleaning & Sweep Problems We See in Mansfield Homes
- Corroded galvanized chase covers on prefab systems. The freeze-thaw cycling off Narragansett Bay moisture attacks galvanized steel from the surface inward. We see this most on 1980s ranches off Route 140 and near the Mansfield airport corridor. The cover rusts through, water tracks down the flue, and the metal liner corrodes at the joints. A stainless replacement from Famco or Olympia Chimney ends the cycle.
- Wood stove inserts hiding creosote at the collar seam. That energy-crisis retrofit in your 1970s colonial constricts draft and concentrates deposits where you can’t see them. The insert has to come fully out for proper inspection. We pull it, document the joint, clean it, and reinstall correctly.
- Warped prefab firebox panels mistaken for masonry cracks. Homeowners see discoloration or deformation and assume it’s a brick problem. It’s not. Factory-built fireboxes use refractory panels that warp and crack with thermal cycling. We identify the manufacturer and spec the correct replacement panel, or advise when the entire firebox assembly has reached end of service life.
- Clay tile liner deterioration in pre-WWII masonry near the town center. The older stock on streets like West Church Street and near the Mansfield Public Library has genuine masonry chimneys with clay tile liners. Decades of condensation and acid flue gases spall the tile and open mortar joints. Our camera inspection finds the damage before it reaches the living space.
Pricing for Chimney Cleaning & Sweep in Mansfield, MA
| Service | Typical Range in Mansfield |
|---|---|
| Annual Sweep with Level 1 Inspection | $180 - $260 |
| Level 2 Camera Inspection | $250 - $450 |
| Creosote Removal (moderate buildup) | $220 - $340 |
| Creosote Removal (glazed/third-degree) | $340 - $520 |
| Chase Cover Replacement (stainless) | $380 - $650 |
| Seasonal Tune-Up Special | $89 |
What moves the number? System type matters most. Prefab zero-clearance units with insert removals take more time than open masonry. Access height affects chase cover pricing - single-story ranch versus two-story colonial. Creosote severity determines cleaning method and time. We give you the full price before we start. No surprises on the bill.
Current offers: $50 off any repair over $250. Free Second Opinion on any written estimate from another company. Permanent 5% Senior and Veteran discount. Call (508) 545-9737 for an exact quote - estimates are free.
We Also Serve Cities Near Mansfield
Our crews run regular routes to Mansfield from our Boston office, with scheduled days covering Plainville, Sharon, Wrentham, and Attleboro. If you’re in one of these towns and need service, the same live-answer phone line and same technician standards apply. We don’t subcontract to regional sweepers. Our trucks, our people, our guarantee.
Serving Mansfield, MA - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cleaning & Sweep in Mansfield
Yes. Most 1980s Mansfield homes have factory-built zero-clearance fireplaces with a brick veneer facing, not structural masonry. The actual chimney is a metal flue liner inside a framed chase. These require system-specific inspection protocols: checking metal liner joints, firebox panel condition, and chase cover integrity rather than mortar joints and clay tile. A sweep trained only on masonry methods can miss the real failure points. Call (508) 545-9737 and we’ll confirm your system type before we book.
Mansfield’s position between Arctic air and Narragansett Bay moisture creates aggressive freeze-thaw cycling that destroys galvanized steel caps and spalls concrete crowns. If you’ve replaced the same galvanized cap twice, the third replacement should be stainless steel. We specify Gelco and Olympia Chimney stainless components that withstand this climate. The upfront cost is higher. The lifecycle cost is lower. Call (508) 545-9737 for a cap inspection and stainless upgrade quote.
Annual inspection is the standard for active wood-burning systems in Mansfield’s climate, with its 5,500 heating degree days and coastal moisture load. Prefab systems with retrofitted wood stove inserts should be inspected annually without exception - the constricted draft accelerates creosote accumulation. Masonry systems near the town center can sometimes extend to every two years if usage is light and previous inspections are clean, but we recommend annual checks until we establish your system’s baseline condition. Call (508) 545-9737 to schedule.
The risk is concentrated and hidden. The insert collar constricts the prefab flue’s designed draft, creating a cold spot at the seam where flue gases condense and creosote hardens. This buildup is invisible until the insert is fully pulled. We’ve found glazed third-degree creosote packed so solid it reduced flue diameter by half. That’s a chimney fire waiting for an ignition source. Our Level 2 inspection protocol includes insert removal and collar-joint examination on these systems. Call (508) 545-9737 to book - estimates are free.
Yes. We replace failed galvanized components with stainless steel chase covers and caps from Famco and Olympia Chimney as standard practice for Mansfield’s coastal-influenced climate. Stainless resists the salt-laden moisture that destroys galvanized in three to four years. We measure on-site, fabricate or order to fit, and install in one visit. The 90-Day Done Right Promise covers the installation. Call (508) 545-9737 for exact sizing and pricing.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Mansfield and surrounding communities since 1984.





Before
After
Before
After
Before
After