Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterGelco Fireplace Services in Attleboro: What to Know First
We provide independent Gelco fireplace services in Attleboro, from gas valve troubleshooting on direct-vent inserts to firebox refractory panel replacement on wood-burning units. Most Gelco jobs we book are completed in a single visit, and we quote the full price before we start - the number on the estimate is the number on the invoice. If you own a Gelco gas fireplace, wood fireplace, or insert anywhere in Attleboro, from the historic homes near Pleasant Street to the newer construction off Route 1, we can service it. Call (508) 545-9737 to speak with a live person and schedule a free estimate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Gelco Products Fail - and How We Fix Them
Gelco builds solid hearth equipment, but after fifteen or twenty years in an Attleboro climate, certain patterns show up again and again. Here is what we see in the field:
- Gelco GDV-series direct-vent gas fireplaces: The pilot assembly collects condensation residue from Attleboro’s freeze-thaw cycles, causing intermittent ignition or a pilot that won’t stay lit. We clean the orifice with proper gas-service tools and replace the thermopile if millivolt output has dropped below 325 mV. Aftermarket pilots are available, but we prefer OEM on GDV units because the bracket geometry is specific and a misaligned pilot causes sooting.
- Gelco wood-burning fireplaces with factory-built metal fireboxes: The refractory panels crack from thermal shock, especially when homeowners burn green oak or maple common in Bristol County. We source Gelco-spec refractory or upgrade to HeatShield Cerfractory foam for a longer-lasting repair, depending on panel thickness and accessibility.
- Gelco fireplace inserts with blowers: The OEM blower motor seizes after a decade of dust accumulation. The bearing housing is a known weak point on pre-2010 units. We stock direct-replacement motors and also offer aftermarket blowers from Famco when the original is discontinued - matched for CFM and noise level so you don’t lose heating efficiency.
- Gelco top-sealing dampers: The stainless cable frays where it passes through the chimney cap guide, especially on taller Attleboro colonials with exterior chimneys exposed to wind. We replace the cable with a heavier-gauge Gelco-compatible part and lubricate the cam mechanism so the damper seals tight when closed.
- Gelco vented gas log sets: The sand and ember bed compacts over years, causing uneven flame distribution and carboning on the logs. We re-grade the media, check gas pressure at the manifold (should read 3.5 inches water column for natural gas), and replace any broken logs with matching Gelco ceramics so the set burns as designed.
Our Gelco Fireplace Services Process
- 1
Call and schedule. A live person answers, 24 hours a day. We ask the model number if you have it, the symptoms, and whether the unit is gas or wood. We book a window that works for you.
- 2
Arrival and diagnosis. Our technician arrives in uniform, background-checked, with a stocked truck. For gas units, we test gas pressure, thermopile output, and draft. For wood units, we run a Level-2 camera inspection to check the flue, firebox, and smoke chamber. You see the photos on a tablet as we take them.
- 3
Parts decision. If the repair needs parts, we explain OEM versus quality aftermarket options. Some Gelco components, like GDV pilot assemblies, we source OEM. For discontinued blowers or refractory, we use professional-grade equivalents from Famco or HeatShield that match or exceed original spec.
- 4
The repair. We complete most Gelco fireplace services in one visit. We protect your floors and furniture, work cleanly, and test every function before we pack up. Gas units get a combustion analysis; wood units get a draft test.
- 5
Documentation and guarantee. You receive photos from the inspection, a plain-English verdict, and a written invoice. Every job is covered by our 90-Day Done Right Promise - in writing, no arguing. If something isn’t right, we come back and make it right.
- 6
Cleanup and follow-up. We leave the work area as we found it. If we ordered a special part, we call when it arrives and schedule the return visit promptly.
What Gelco Fireplace Services Costs in Attleboro
Gelco fireplace service pricing in Attleboro depends on fuel type, accessibility, and whether parts are needed. Here are the ranges we quote most often:
- Gas fireplace tune-up and safety check: $89 (our seasonal special) to $175 if we find a failed thermopile or dirty burner
- Pilot assembly replacement on Gelco GDV units: $280-$420 including OEM part and labor
- Blower motor replacement on Gelco inserts: $340-$580 depending on motor size and whether the housing needs modification
- Refractory panel replacement, wood-burning Gelco: $450-$890 per panel; multi-panel fireboxes run higher
- Damper cable and cap service: $220-$380
- Fireplace conversion (wood to gas insert): $2,800-$4,500 including Gelco-compatible venting and permit coordination
These are real numbers for Attleboro homes, not bait-and-switch estimates. We inspect first, quote in writing, and the price does not change unless you ask for additional work. Call (508) 545-9737 for a free estimate - we bring the pricing to you.
Why Attleboro Homeowners Call Hearthstone Chimney Co. for Gelco Work
Attleboro homeowners have called us for over 42 years because we do the job right and we stand behind it. Our 90-Day Done Right Promise is in writing with no arguing - if it’s not right, we come back. Russell Haines and our technicians know Gelco equipment from hands-on service, not from a catalog, and we back that expertise with professional-grade materials from DuraFlex, HeatShield, and the other brands we trust. When a Gelco part is discontinued, we don’t substitute with builder-grade hardware; we source a quality equivalent that fits and functions as intended. We answer the phone with a live person, 24 hours a day, and we show up when we say we will. The chimney doesn’t care what you paid for the house. It just needs to be right.
FAQs
No. As an independent Gelco service provider, we use warranty-safe practices and OEM or equivalent professional-grade parts. Gelco’s warranty on the original equipment expired years ago for most Attleboro units we see, but our 90-Day Done Right Promise covers our workmanship in writing regardless.
Most Gelco fireplace services are completed in a single visit of two to four hours. If we need to order a discontinued part, we typically have it within five to seven business days and return promptly to finish. Call (508) 545-9737 to schedule - estimates are free.
We recommend repair when the firebox or venting is sound and the cost is under half that of a new unit. We recommend replacement when the heat exchanger is cracked, the flue is improperly sized, or repair parts are no longer manufactured. We show you the camera footage and explain both options with exact numbers so you decide.
Yes, for most models. We maintain relationships with distributors who stock NOS Gelco components, and we cross-reference with professional-grade aftermarket parts from Famco and HeatShield when OEM is unavailable. We never install a part that doesn’t meet original spec.
Once a year, before the heating season begins. Attleboro’s cold snaps start in late October, and a pre-season service catches gas pressure issues, blower problems, and vent blockages before you need the heat. Our $89 Seasonal Tune-Up includes a full safety check and cleaning. Call (508) 545-9737 to book before the fall rush.
Ready to get your Gelco fireplace working right? Call (508) 545-9737 now. A live person will answer, day or night, and we’ll schedule your free estimate at a time that works for you. We serve Attleboro and surrounding communities, and we’ve been doing it right for over 42 years.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Attleboro and nearby areas.